This release note and the software it accompanies it are copyright (c) 2003, Intel Corporation, and may only be installed and used in accordance with the license that accompanies the software.

File name: RH62_drv204.zip

Driver version 2.04

This download supports SCSI Intel(R) Server RAID Controllers, please verify that this driver has been tested with the RAID controller you have chosen to use.
You can verify compatability on the RAID controller's driver page at http://support.intel.com.

Attention!
===========
This download is created using a zip compression untility and is compatible with a variety of zip programs,  please extract it to floppy diskette keeping the directory structure intact.
Please refer to product and OS documentation for application instructions for this driver.

Contents
=========

File			Version 	Size		Date         	Description		
-----			--------     	----- 		-----        	------------
Modinfo			N/A		1KB		10/16/02	
Modules.cgz		2.04		310KB				Driver
Modules.dep		N/A		0KB							
PCI Table		N/A		5KB
README.TXT		n/a	       	2KB	   	2/4/03	This file


Using This Tool
================

	1. Create a Driver Disk by extracting the download to a floppy diskette.
	2. Boot from the Redhat 6.2 CD; at the install prompt type
		in "expert <ENTER>". This will cause the installer to
		prompt for a Driver Disk. Insert the created Driver Disk
		in the floppy drive; and the installer will read its contents.
	3. When the option is given to manually add new devices; choose 
		"Add Device", and at the next screen choose "SCSI". You will be 
		presented with a drop-down list of SCSI device drivers. From the
		drop down list, choose "Updated gdth Driver" and this will load 
		the correct GDTH driver.
		Note: DO NOT choose the option "GDT ISA/EISA/PCI Disk Array Controller" 
		this will load the wrong version of the GDTH driver.
	4. After the Driver is loaded; the installer will present the RAID volume
		as a SCSI disk (i.e /dev/sd*).
	5. Follow instructions from the Redhat Install manual from here on.

